This is Joshua Peterson with Peterson Electric. We are here today in Westminster showing you how to wire a home theater. Three main points I want to talk about is LED lighting. That is a major factor on how it is going to be switched and where it is going to be. We are going to be doing this in the coffered ceiling, right here in the edges. We are going to do it in the toe kicks, lights right here. This is a little bit of stadium seating. The other thing we are looking at doing for him is the power separate. We have power designated for our projector with our screen. We also have it for our AV equipment and our 2 base speakers up front. It is a 9.2 surround sound system. We want to make sure all these electronics are on the same phases and making sure our wattage and amperage is not too high on the breaker. The 3rd thing, we wanted to talk to you about is arc-fault breakers. Trying to tie in old arc-fault systems with old wiring that is not arc-faulted, we have to figure out what is what and running new circuits, so we know we aren’t tying into old systems and have it on our new arc-fault. Thanks for joining us! We do home theater systems like this as well. Give us a call if you need any work.
